How to Remove Secret Password Cisco Router?

Removing a secret password from a Cisco router involves accessing the device’s configuration mode and modifying the password or removing it entirely.

To begin, connect to the router via a console or Telnet session. Enter the enable command and provide the current password, if prompted. Once in privileged mode, enter the configure terminal command to access the configuration mode.

Next, locate the line in the configuration that contains the password. The password can be stored in various forms, including a plaintext password or an encrypted hash. If the password is in hash form, it must be decoded to modify or remove it.

To modify the password, enter the appropriate configuration command followed by the new password. For example, the command “enable secret newpassword” will change the enable password to “newpassword”. To remove the password entirely, use the “no” keyword in place of the password, such as “no enable secret” to remove the enable password.

Finally, once the changes have been made, save the configuration to ensure the updated password is saved. This can be done by entering the “write memory” command.

Video Tutorial:What is enable secret password in cisco?

What is the default secret password for cisco?

It is important to note that Cisco does not have a default secret password, as the security of their devices is a top priority. When setting up a Cisco device, users are prompted to create a unique password for the administrator account, which is used to configure and manage the device. It is recommended that users choose a strong and complex password to protect against unauthorized access and security breaches. Additionally, Cisco offers various security features to further enhance the protection of their devices and networks. It is crucial for users to educate themselves on best practices for securing their Cisco network and regularly update their passwords for optimal security.

What is secret vs password in cisco?

In Cisco, a secret is a type of password used to store encrypted privileged EXEC (enable) mode passwords. The enable secret is used to secure access to privileged EXEC mode. It is a more secure alternative to the enable password because it uses a stronger type of encryption.

On the other hand, a password is a secret word or phrase that is used to gain access to a device or network. In Cisco, there are different types of passwords such as console password, auxiliary password, vty password and others. These passwords are used for various authentication purposes and help to ensure the security of the network.

Thus, while both secret and passwords play a role in securing Cisco networks, secret is used specifically for privileged access while password can be used for various other authentication purposes.

How do I reset my cisco admin password?

If you have forgotten the password to log into your Cisco device as an admin, don’t worry. There are several ways to reset the password on the Cisco device, but the most common method is to use the “password recovery” process.

Here are the general steps you’ll need to follow to reset your Cisco admin password:

1. Connect to the console port of the Cisco device by using a console cable.
2. Restart the device to enter the ROM monitor mode.
3. Type “confreg” command in the console and then hit enter.
4. You will be prompted with the current configuration register value. Set this value to “0x2142”, which tells the router to bypass the current config file.
5. Reload the device so that it boots into the normal operating system without loading the configuration.
6. You can now access the device without a password and then run default configuration commands to reset the password to a new one.
7. After resetting the password, set the configuration register back to its original value.

It’s important to note that the process may vary slightly depending on which Cisco device you are using. So, it’s always a good idea to check the Cisco documentation or seek assistance from a Cisco specialist if you are unsure.

What is the difference between enable password and secret password?

In the context of network security, enable password and secret password are two different types of credentials used to protect privileged access to network devices such as routers, switches, and firewalls.

An enable password is a non-encrypted password that protects the privileged mode, allowing the user to access and configure the device. This type of password is used to restrict access to configuration commands that could potentially cause harm to the network.

On the other hand, a secret password, also known as a enable secret password, is a more secure password that is encrypted and stored in the device’s configuration file. It is used to protect the privileged mode access to a device and is considered a best practice in network security.

Overall, while both types of passwords serve a similar purpose of protecting privileged access to network devices, a secret password is a more secure option due to its encryption and the additional layers of protection it provides.

Why is the enable secret password?

The enable secret password is used to secure privileged access to Cisco network devices like routers and switches. This password is used to protect the enable mode, which is a higher level of access than the user mode. When a user enters the enable secret password, they gain access to additional commands and configuration capabilities. This password is set by the network administrator during the initial configuration of the device. It is important to use a strong and unique enable secret password to prevent unauthorized access to the device, which could lead to security breaches and data loss. Therefore, Cisco network administrators should consider strong password policies and ensure that passwords are changed regularly to maintain the security of their networks.